A coin trap (also known as a drain filter or lint trap) is a crucial component in washing machines, especially front-loading models. Its primary purpose is to catch small items like coins, lint, and jewelry before they can enter and potentially clog the drain pump or hoses.
Here’s why coin traps are important and what you should know about them:
- Preventing Clogs: Without a coin trap, small objects can easily be sucked into the drainage system, potentially damaging the drain pump impeller or creating blockages that prevent the washer from draining properly. This can lead to a washer full of water, which won’t spin and can result in damp clothes or even flooding.
- Location and Access: The location of the coin trap varies depending on the washer’s make and model.
– Front-load washers: Often have the coin trap easily accessible behind a small flap or panel located at the bottom front of the machine.
– Top-load washers: May have filters located inside the agitator or along the top rim of the drum.
– Some models: The coin trap is deeper within the drainage system, potentially requiring removal of the back panel or even the washer shell to access it.
- Cleaning and Maintenance: Regular cleaning of the coin trap is essential to ensure proper drainage and prevent clogs.
– To access the trap (for front-load washers): Locate the small access door or panel at the bottom front of the machine.
– Draining excess water: Many models have a small drain tube near the trap. Pull out this tube, place it over a bucket or pan, and remove the stopper to drain the water. Some washers require slowly turning the coin trap cover to allow water to dribble out.
– Removing the trap and debris: Unscrew the coin trap cover (usually counter-clockwise) and pull out the trap itself. Remove any coins, lint, or other items that have accumulated.
– Checking the drain assembly: Use a flashlight to inspect the area behind the coin trap to ensure nothing is stuck in the tube between the tub and the trap.
– Reinstallation: Reinsert the coin trap, ensuring it’s properly aligned, and screw the cover back on tightly.
If your washing machine is not draining properly, and you’ve checked the coin trap for clogs, other potential causes could include a kinked drain hose, a malfunctioning lid switch, a worn drive belt, a broken pump, or a defective water level control. In some cases, using too much detergent can also contribute to drainage issues due to excessive suds and buildup. If you’re unsure about troubleshooting or repairing the issue yourself, it’s best to consult a professional appliance technician.
What to do if a coin is stuck in the washing machine?
Inspect the drum by rotating it manually to locate the coin. Use a flashlight to check between the drum and tub. If visible, carefully retrieve the coin with needle-nose pliers or a magnet tool. Avoid forcing the drum to prevent damage. Run a spin cycle afterward to ensure no residual objects remain.
How to remove coin trap on Samsung washing machine?
Thanks for asking. Water. Then recap the tube and secure it under the tab now unthread the old coin trap filter counterclockwise to remove. Clean out the housing.
Do all washing machines have AP traps?
A P trap is a necessary part of the plumbing for a washer.
How do you fix a stuck coin slot on a washing machine?
Thanks for asking. SPRAY IT WITH WD 40 AND THEN HIT IT HARD ,IT SHOULD COME BACK IF THE COIN YOU PUT IN IS NOT BENT.